Categories starting with P

Polymer (20)

Items starting with P Files

File size: 344.44 KB Download

Performance testing of oil spill skimmers (NT CHEM 002)

NT CHEM 002

  • This document describes a methodology for collecting quantitative performance data for oil spill skimmers.

File size: 61.66 KB Download

Protective paint coatings on steel: Accelerated corrosion test in high humidity air containing small amounts of sulphur dioxide (NT BUILD 377)

NT BUILD 377

  • This method specifies the test equipment, preparation of test specimens and the procedure for accelerated corrosion tests on protective paint coatings on steel. The corrosion test is conducted in an artificial atmosphere of air containing 1 ppm sulphur dioxide. Exposure takes place at a constant relative humidity of 95 % and at a constant temperature of 23 ºC.

File size: 60.92 KB Download

Paint applied to wood: Water permeability (NT BUILD 331)

NT BUILD 331

  • This NORDTEST method specifies an accurate method to determine the permeability coefficients for materials forming an attached coat when applied to a permeable substrate, e.g. wood. This method takes into account inherent cup effects in permeation experiments and eliminates the influence from the substrate during the test.

File size: 21.80 KB Download

Particle boards: Compression strength (NT BUILD 317)

NT BUILD 317

  • This standard specifies a method of determining the compression strength of particle boards parallel to the plane of the board.

File size: 32.39 KB Download

Particle boards: Modulus of elasticity in tension and tensile strength (NT BUILD 316)

NT BUILD 316

  • This standard specifies a method of determining the modulus of elasticity in tension and the tensile strength.

File size: 42.10 KB Download

Particle boards: Shear strength perpendicular to the plane of the board (NT BUILD 315)

NT BUILD 315

  • This standard specifies a method of determining the shear strength of particle boards perpendicular to the plane of the board.

File size: 40.65 KB Download

Particle boards: Shear strength parallel to the plane of the board (NT BUILD 313)

NT BUILD 313

  • This standard specifies a method for determining the shear strength of particle board (flat pressed board) parallel to the plane of the board by rolling shear.

File size: 124.05 KB Download

Paint coatings, organic foil: Carbon dioxide diffusion resistance (NT BUILD 300)

NT BUILD 300

  • This NORDTEST method is developed to determine the gas diffusion resistance of building sealants for the protection of concrete.

File size: 87.07 KB Download

Punched metal plate fasteners: Strength (NT BUILD 267)

NT BUILD 267

  • This test method gives rules on the determination of strength and stiffness of punched metal plate fasteners and joints with punched metal plate fasteners.

File size: 28.56 KB Download

Plastics, aged: Thickness of oxidized layer (NT BUILD 095)

NT BUILD 095

  • This NORDTEST METHOD covers the determination of the oxidation degree of an aged plastic.

File size: 47.52 KB Download

Partitions under horizontal static load: Rigidity (NT BUILD 062)

NT BUILD 062

  • This NORDTEST METHOD specifies a test procedure for testing the rigidity of partitions under horizontal static load.

<<  1 [2

Nordtest

Nordtest is a trademark of Nordic cooperation in conformity assessment. The emphasis of Nordtest is to develop, promote and innovate Nordic test methods and pre-normative activity. Nordtest endeavours to remove technical barriers to trade and promotes the concept: “Approved once, accepted everywhere”.